Laminates such as fbreglass or carbon-fbre are used to compliment the properties of the core material by increasing torsional strength, edge-grip and rebound.
Matte EC4060 topsheets require no lacquering saving around 100gm / pair, and reduces the use of not-quite-environmentally friendly lacquer. It also shows through the natural structure of the underlying laminate layers.
Our standard core material. Poplar is a medium-weight, damp, vibration-absorbing softwood. Ash is a heavier hardwood that compliments the Poplar by increasing stiffness, responsiveness and providing a solid base for the binding screws.
Used on most of our skis. A traditional manufacturing method that provides strength, durability, good grip and edge hold. Rubber is used to dampen vibration and bond the base layers to the core.
A traditional manufacturing method that provides strength, durability, good grip and edge hold. Sidewalls protect the sides of the sandwich core, and increase a ski's torsional stiffness and therefore edge control and pop. Added micro-cap increases the durability of the topsheet.
Used on 90% of our skis, silkscreen printing provides bright, strong colours that help our skis pop off the walls in-store. Unlike the sublimation process used by many of our competitors, very little waste is created using this method, and water-based inks are used to reduce environmental impact.
Tip & tail rocker with varying amounts of camber underfoot gives maximum versatility and float off-piste.
For progression all over the mountain, the Candide 3.0 Jr. takes groms from the piste to steeps with confidence. Sandwich construction, micro-cap protection and a poplar/ash core provide durability, whilst a 100mm waist, flat camber and rocker in the tip and tail provide float when it gets deep and enough underfoot to start stomping big air.
Снаряжение :: Советы :: Фото/видео :: Поиск :: Профиль
