The majority of our skis are equipped with ABS sections (a synthetic material with fiberglass particles), which act as shock-absorbers when skiing on hard snow or ice. The only skis that don’t have this reinforcement are the high-end touring skis (for the purpose of light cap weight. We developed a new 3D light cap ABS (CTS LIGHT) which permits still a lower weight but with an incredible resistance. We use this new technology for some skis in the free touring and freeride sector.
We use exclusively top quality sintered bases with high molecular density. We use 3 different P-Tex ( 2000 / 4000 / 5000 ) bases throughout the range which are carefully chosen to match the individual ski.
The new 3D light cap ABS sidewall is unique in the way that the ABS runs through to the wood core of the ski and works also as a form of reinforcement. This system also offers a weight gain over the classic CTS which why it is integrated in to the Free Touring and Freeride ranges.
We reviewed the way we use our different edges throughout the entire range, with a focus on increasing durability of the skis that get the heaviest use. We’ve done this by varying the thickness of the edge along the length of the majority of the skis. The touring and free-touring ranges now benefit from a wider edge in places to help resist impacts associated with poor snow cover. The only skis with a completely straight and thinner edge profile are the competition touring range for weight-saving reasons. The edges are in 3 distinct widths; 1.8mm, 2.0mm & 2.4mm.
All of the vulnerable areas of the ski (edges, tip & tail) are reinforced with a rubber layer that protects from shocks and seals the ski. These layers also serve to absorb vibrations and stop the infiltration of water into the ski’s core, which can cause delimitation and eventually the destruction of the ski.
The Twin Rocker has an exaggerated length and height of rocker on both the tip and the tail which allows the ski to pivot easily and float effortlessly in powder. The ski still has a good contact zone in the center with plenty of edge to keep grip and maintain stability at speed.
The wood core of a ski is fundamentally important; not only does it give the ski its liveliness, it also pre-determines the ski’s durability and therefore differs hugely between the different ranges (piste-freeride-freestyle-touring). We continue to only use wood cores that are certified FCS and PEPS (www.fcs.org, www.pefc.org). We use the following woods in our manufacturing: Beech, Okume, Poplar, EPL poplar light, Light Karuba, Ultra light Karuba. Every core is designed to match the qualities of the relevant ski.
The VISTA is a completely new concept in the touring sector. Largely inspired by the freeski sector, the VISTA is a complete ski based on a totally new geometry. This light ski has a notable tip and tail rocker profile which helps it pivot quickly and makes any terrain fun to ski. Armed with a light cap ABS (CTS LIGHT) construction, the VISTA has excellent energy transmission from the skier to the edge of the ski. This ski opens the door to the backcountry, but also is perfectly capable back on the groomed piste. A true revelation!